Description
Husqvarna 572XPG professional chainsaw 45cm bar
This new generation Husqvarna chainsaw is the best of its kind!
"Since Husqvarna began manufacturing chainsaws nearly 60 years ago, we have been focused on constantly improving chainsaw performance and user experience. We are confident that the new 572XPG® will demonstrate that Husqvarna is an innovation leader in the world of chainsaws, with a strong commitment to durability."
Quote by Pavel Hajman, President of Husqvarna Division
The 572XPG® features six key factors:
12% higher cutting capacity
The 572XPG® has 12% increased cutting capacity even when using long saw blades compared to older Husqvarna power saw models within the 70cc range. This has been made possible with the new engine design and improved cooling, which is a prerequisite for the high power output. The engine gives users a 30% wider rev range compared to previous generations; this generation's range has been increased by 2000 to 3000 RPM. The wider rpm range ensures that the engine delivers the right power predictably in all operating situations and has better throttle response time, making work faster and easier.
The lighter and smaller diameter flywheel provides quick acceleration. Combined with good torque, this is the most powerful 70cc chainsaw Husqvarna has ever made.
Power to weight ratio
A good power-to-weight ratio means higher productivity thanks to available power output. The power-to-weight improvement in the 572XPG® comes from better weight distribution in the machine and an improved engine structure. The crankshaft and muffler, along with other critical components, have been designed for functionality and additional heavy duty use. To compensate for this increase, the weight of various components such as the flywheel (30g), starter cap (30g), crankshaft (200g), clutch cap (30g) and ignition module (29g) has been reduced. This translates into a weight of 6.6 kg and a power output of 4.3 kW (5.9 HP), a significant power-to-weight improvement over previous Husqvarna power chainsaw models in this power segment.
Up to 20% more cooling capacity
Cooler engines have better power, higher performance and increased product life. The 572XPG® has increased cooling capacity by up to 20% compared to previous generations of Husqvarna chainsaws. The improved cooling capacity is the combination of new hardware, digitalization and engine control (soft cut- out system).
As for the hardware, the heat barrier in the 572XPG® is made of specially manufactured polymers that are heat-resistant, extremely insulating, lightweight and integrated into the cover. The low temperatures of the carburetorEURr are fundamental to good starting performance, since fuel today begins to vaporize at very low temperatures.
Digital airflow analysis makes it possible to optimize airflow inside the product, refining the placement of cooling vents and internal baffles in the 572XPG®. The newly designed internal components also mean less dust and dirt particles that impede cooling and get stuck in the cooling fins.
The soft cut- out system (an ignition management system) protects the engine from harmful overspeeds by automatically adjusting the ignition timing to the highest RPM (revolutions per minute). This means a 30% reduction in the internal pressure built up in the engine - compared to Husqvarna chainsaws without this feature - for smoother operation, lower operating temperatures and maximum run-up time.
Optimized air filtration
Standard on the 572XPG® is a heavy-duty air filter with a large filter area for longer use and better filtration. Compared to previous generations, the 572XPG® has a larger filtration area, this means increased operating intervals while maintaining performance and this requires less frequent cleaning. The improved filtration capacity and a well-sealed system help stop abrasive particles in the combustion chamber. For a chainsaw with a healthy engine that lasts longer.
10 times faster adjustment of air/fuel mix
In 2009, Husqvarna introduced AutoTuneTM, which allows system calibration without the need for manual adjustments. This means that the machine is always correctly tuned in changing operational conditions, this maximizes uptime as users do not have to worry about carburetor adjustments. AutoTuneTM also significantly reduces exhaust emissions, helps meet global emissions regulations and contributes to a cleaner working environment.
With the launch of the 572XPG®, AutoTuneTM has been updated, allowing automatic adjustments to be made up to 10 times faster than the previous version. The update has four areas of improvement over previous generations:
1. Faster tuning is made possible by a new micro processor, which reduces the time it takes for the system to tune the engine. In practice, this means that all engine settings are 100% correct after the first few cuts.
2. New software that calibrates from low speed to top RPMs enables a wider adjustment range.
3. Partial throttle calibration has been added to AutoTuneTM. Average RPMs are measured continuously by the system and used to optimize engine performance.
4. ''Lean out'' Protection minimizes the risk of overheating occurs, preventing serious engine damage.
New X- CUT chain with start & finish latch
The second chain is the X- CUT C85 and will be standard on the 572XPG® from 2018, improving the cutting experience, this chain is made in the new chain factory in the town of Huskvarna Sweden. The new chain is a full chisel, 3/8" chain for professional use and is easily identified by the gold latch that allows sawyers to easily track the start & finish of file job. Like the other X- CUT SP33G chain, the chain is sharp out of the box, pre-stretched, highly durable and improves saw efficiency.
Tried to perfection by professionals
Every part of the 572XPG® is built to meet the toughest conditions around the world, day after day. Field tests conducted by Husqvarna prove the 572XPG® chainsaw has the ability to tackle different altitudes, climates and humidity levels.
Test locations:
- Canada, British Columbia
- USA, Massachusetts
- Australia, New South Wales
- South Africa, Drakensberg
- Switzerland, Interlaken
- Russia, Siberia
Other important factors:
- Anti-vibration system reduces fatigue in arms and hands
- Flip-up fuel and oil caps are easy to open and secure without tools, even with winter gloves
- Air injection filters 98% of incoming dust
- Improved chip ejection prevents clogging
- Front handle position is 10 mm closer to center of gravity for better control
- Optional heated handles for operating chainsaws in colder climates
- Wear-resistant visor molded into machine body
- Rubberized handle inlay for secure and good grip
- Transparent fuel level indicator
Would you prefer the saw with a different blade length? Just contact us and we will convert this for you free of charge*!
*Up to a maximum length of 75cm
Bundle discount
2 in stock
Husqvarna 572xpg chainsaw action
Save up to 14% if you have the following 7 combining items with each other.
Normal price
€ 1,877.94
Discount (14%)
€ 257.95
Bundle price (VAT incl.)
€ 1,620.00
Features
Excellent cooling performance for longer engine life
Felling sight to last a lifetime
Countersunk bar nuts
LowVib®
Slimmed-down design
Air injection
Flip-up fuel cap
Quick-release air filter
Magnesium crankcase
Held starter screws
Click closure cylinder cover
AutoTune
X-Torq®
Visible fuel level
Three-piece crankshaft
Side chain tensioner
Adjustable oil pump
Standard equipment
- Husqvarna 572XPG
- Manual (NL)
- And the following articles
Recommended accessories
Specifications
Engine.. | |
---|---|
Cylinder capacity | 70.6 cm3 |
Output power | 4.3 kW |
Maximum speed | 9900 rpm |
RPM idle | 2700 rpm |
Spark plug | NGK BPMR7A |
Electrode distance | 0.5 mm |
Torque, max. | 4.5 Nm |
Petrol consumption | 429 g/kWh |
Fuel consumption | 1.76 kg/h |
Exhaust gases (CO2 EU V) | 841 g/kWh |
Accessories | |
---|---|
Saw blade length max. | 70 cm |
Saw blade length max. | 38 cm |
Chain speed at 133% of maximum engine power | 29.3 m/s |
Dimensions | |
---|---|
Weight (excluding pruning equipment) | 6.6 kg |
Lubricants | |
---|---|
Oil tank volume | 0.35 l |
Oil pump type | Adjustable throughput |
Noise level | |
---|---|
Sound pressure level (LWA) | 120 dB(A) |
Noise level, measured | 118 dB(A) |
Sound pressure level at user's ear | 107 dB(A) |
Vibrations | |
---|---|
Equivalent vibration level (ahv, eq) front / rear handle | 5.0 m/s |
Equivalent vibration level (ahv, eq) front / rear handle | 4.1 m/s |
Logistics | |
---|---|
Weight | 9523 g |
Gauge | 340 mm |
Length | 540 mm |
Height | 290 mm |
Part drawing
Below you can see the spare parts drawings and documents of a Husqvarna 572 XP® / 572 XP® G / 572 XP® W / 572 XP® GW from the category Chainsaws.
Other customers also bought
Documents & downloads
References
The above product is an upgraded version, successor, replacement for the following item number(s).
Item number | 966733418 |
Item number | 572XPG |