The mechanical sheet wedge for the safest applications with the highest lifting capacity

The Nordforest Mechanical Felling Wedge Titan 80 is used as an alternative to heavy wedge work.

Advantages of use with the Nordforest Mechanical Felling Wedge Titan 80 compared to classic wedge work:

• Vibration-free wedges without striking
• So the risk of falling branches is much lower
• Ergonomically advantageous work due to high lifting capacity
• In the increased safety when felling on slopes, because the operation of the cone wedge is safer (standing on a slope) than felling against the slope.

Technical data:

Length 480 mm
Width 120 mm
Height 165 mm
Lifting wedge height 80 mm
Lifting wedge width 90 mm
Lifting wedge length 224 mm
Wedge extension 170 mm
Thread stitch 5 mm
Lifting force max. 25 t
Weight 5600 g

With a pull on the ratchet of approx. 70 kg the max. lifting force can be reached. The generated maximum torque is then about 300 Nm.

execution:

• Spring steel plates with pressed out cams height 1.5 mm
• Enclosed screw drive with tapered roller bearings and fixed sleeve
• Three grease nipples feed the wedge surfaces, screw drive and tapered roller bearings
• Material: lifting wedge made of special plastic, main housing made of aluminium
• Screw drive made of high quality special steel
• Handle made of plastic