Description
Exceptionally easy-to-operate high performance brushcutter with unique ergonomic solutions designed for full-time space tasks. Equipped with AutoTune for optimal engine performance. Optimized transmission with the bevel gear at an angle of 24 degrees simplifies targeted felling in dense forests. Warm hands in cold, humid climates with handle heating. Easy to start X-Torq® engine with fast acceleration, reduced fuel consumption and emissions. Very low vibration thanks to effective anti-vibration of the engine, drive shaft and cutting equipment. Easy to start with Smart Mode.
Supplied with Balance XT harness.
Features
AutoTune
Start easily
Heated handles
Balance XT
Thumb operated throttle lever
Grease nipple on wire
Forestry hoe transfer
Easy changing of cutting blade
LowVib®
Adjustable handlebar
Fuel pump
Automatic back/stop button for easy starting.
X-Torq® motor
Optimal comfort
Specifications
Engine specification | |
---|---|
Cubic capacity | 45,7 cm³ |
Cylinder diameter | 42 mm |
Cylinder stroke | 33 mm |
Power output | 2.2 kW |
Maximum speed | 9000 rpm |
Fuel tank capacity | 0.9 liter |
Fuel consumption | 450 g/kWh |
Petrol consumption | 1 kg/h |
Ignition module air gap | 0,3 mm |
Idle speed | 2700 rpm |
Spark plug | NGK CMR6H |
Electrode gap | 0.5 mm |
Clutch engagement speed | 3900 rpm (±120 rpm) |
Maximum rpm output shaft | 10100 rpm |
Output shaft thread | M12x1.75V |
Lubricants | |
---|---|
Lubricant type (bevel gear) | Mineral grease |
Vibration & noise data | |
---|---|
Equivalent vibration level (ahv, eq) left / right handle | 2/3.2 m/s² |
Sound pressure level at operator ear | 99 dB(A) |
Guaranteed sound level (LWA) | 114 dB(A) |
Transmission data | |
---|---|
Gear ratio | 01:01.3 |
Gearing angle | 24 ° |
Equipment | |
---|---|
OEM Saw blade | Scarlett 225-24 |
OEM Harness | Balance XT |
Overall dimensions | |
---|---|
Weight without fuel and cutting equipment | 8.1 kg |
Logistical data | |
---|---|
Package dimensions, LxWxH1xH2 | 1834x324x310x114 mm |
Logistics | |
---|---|
Weight | 10200 g |
Gauge | 330 mm |
Length | 1850 mm |
Height | 310 mm |
Part drawing
Below you can see the spare parts drawings and documents of a Husqvarna 545FXT AT from the category Grass Trimmers / Brushcutters / Combi-Trimmers.
Documents & downloads
References
The above product is an upgraded version, successor, replacement for the following item number(s).
Item number | 967970601 |
Item number | 966015601 |
Item number | 545FX |